Dacor · Tenleytown & AU Park
Dacor Stove Repair in Tenleytown & AU Park
A broken Dacor stove in 20016? We test it in place, explain what failed and agree a price before any repair.
Open 24/7 · a person picks up
Dacor Stoves in DC Homes
TrueFix Washington DC sends technicians to Dacor stoves across Tenleytown & AU Park. Read us the model and serial numbers from the rating plate when you book; it lets us check parts availability before the visit. Repairs use manufacturer-specified parts by default and carry our 90-day parts & 30-day labor warranty.
How a Dacor Stove Repair Visit Works
Related Services
More repairs we handle in homes and businesses across Washington, DC.
Dacor Stove Faults We Repair
A symptom can trace back to more than one part, which is why we test before quoting.
- Not Igniting
- Burner Not Heating
- Gas Odor from Stove
- Uneven Heating
- Gas Burner Not Lighting
- Oven Section Not Heating
- Surface Element Not Heating
- Clock / Timer Not Working
- Control Panel Not Responding
- Oven Temperature Inaccurate
- Broiler Not Working
- Self-Clean Not Working
- Storage or Warming Drawer Not Working
- Stove Not Level
- Anti-Tip Bracket Not Installed
- Oven Door Problem
- Stove Moving When Using Oven Door
- Power Cord or Terminal Block Issue
- Burner Weak on One Side of Grate
- Oven Baking Lopsided
- Burner Indicator Light Stuck On
- Wrong Burner Igniting
- Yellow Flame on One Burner Only
- Oven Takes Long Time to Ignite
- Burner Cap Misaligned After Cleaning
- Broil Element Incorrect Position
- Gas Regulator on Stove Failing
- Pilot Light Out (Older Standing Pilot Stove)
- Thermocouple Failure
- No Power for Electronic Ignition
- Stove Top Porcelain Discolored
- Oven Temperature Knob Not Controlling Oven
- Burning Smell from Storage Drawer
- Burner Cap Cracked or Damaged
- Stove Top Surface Chipped or Cracked
- Broil Drawer Issue
- Gas Stove Will Not Self-Ignite at All
- Oven Not Responding to Controls
- Low Gas Pressure Affecting Stove Performance
More Dacor Repairs in Tenleytown & AU Park
Notes on Dacor stove service
A stove that stops working is disruptive, and a Dacor has its own quirks worth knowing. This page covers how we diagnose Dacor stoves in Tenleytown & AU Park, what usually fails and what it tends to cost (most repairs run $120–$400).
Tenleytown & AU Park is upper Northwest, the greener, lower-density end of Washington, DC, reached along Wisconsin Avenue, Massachusetts Avenue, Nebraska Avenue and MacArthur Boulevard. Homes are larger and parking is easier than downtown, and a typical call involves a bigger kitchen, a basement laundry and, quite often, a second refrigerator downstairs.
Here is how a stove gets diagnosed: the burners and igniters first, then the oven sensor and element, then the door, because the cooktop and oven fail independently. On the brand side, Samsung bought Dacor in 2016, and newer Dacor appliances pair Samsung-designed electronics with Dacor's cooking and refrigeration hardware.
When you call (703) 468-4416 about a repair in Tenleytown & AU Park, we'll ask for the model number so the likely parts travel with the technician. That, more than anything, decides whether the job finishes on the first visit. We serve the whole ZIP code here.
How Dacor builds its stoves
The cooktop and the oven on a Dacor stove fail independently. A burner that will not light and an oven that will not heat almost never share a cause. Although Dacor belongs to Samsung, its equipment is engineered separately, and parts are matched to the Dacor model number. Dacor equipment is usually built in, so removal and refitting are part of the plan, and repair almost always makes more sense than replacement. In older houses with renovated kitchens, we also check the gas or electrical supply the appliance is connected to.
One more point: on older Dacor ovens from before the Samsung era, original control boards are the parts most likely to be scarce, and that is checked before a repair is quoted.
Dacor stove problems we see most
The faults that turn up most on this combination are: spark electrode and switch faults on surface burners; temperature sensors drifting out of calibration; door gaskets and hinge springs letting heat escape; bake and broil element failures; door lock faults after self-clean. These are failure points of Dacor's stove design, which is why they differ from a generic stove checklist.
Knowing the list narrows the search on a Dacor stove but doesn't replace testing. Two of those faults can produce the same complaint, and confirming which one it is keeps you from paying for the wrong part.
Before you buy a part for your Dacor stove
The stove symptom people most often misjudge is an oven that bakes unevenly, blamed on the thermostat when a failed convection fan or a bad door seal is the cause. On Dacor equipment, as on any other, a wrong reading leads to the wrong part, and the wrong part is often the priciest one in the machine.
On a Dacor stove, a meter reading or a test run settles the question in a few minutes, which is far cheaper than a part bought on a hunch.
Dacor stoves in Tenleytown & AU Park homes
Houses in Tenleytown & AU Park give us more room to work than most homes on our routes, and the equipment reflects it: wider ranges, built-in refrigeration, double wall ovens and full-size laundry pairs. Higher-end appliances are usually worth repairing, and we weigh the repair against what replacement really costs in a fitted kitchen.
Something that shapes stove repairs around here: rowhouse kitchens where the stove's gas line or circuit is older than the stove, so the connection is checked too. None of that changes how a Dacor stove is built, but it changes how it is diagnosed. A slow drain, a weak circuit or a cabinet with no airflow can mimic a failed part, so the installation is part of every inspection.
Summer heat, winter cold and appliances in Tenleytown & AU Park
Winter brings a different set of calls in Tenleytown & AU Park. Refrigerators and freezers in unheated spaces can stop working properly when the room gets too cold, and the line feeding an ice maker can freeze where it runs along an outside wall.
Ovens get their hardest use between Thanksgiving and New Year's, and a weak igniter or a tired bake element tends to quit then. If an oven has been slow to heat all fall, getting it looked at before the holidays is the easier appointment.
What to have ready when you call about your Dacor stove
Call (703) 468-4416 with the model number and a short description of what the Dacor stove is doing. The model number is on a label inside the door, on the frame or on the back panel, and it lets the technician bring the parts that commonly fail on that model.
If you have a parking pass, a driveway or a loading dock, mention it; street parking can eat into the visit. The Dacor stove repair itself is quoted once, after diagnosis, and backed by our 90-day parts and 30-day labor warranty.
Dacor stove repair, in numbers
Dacor Stove Questions
Want to talk it through?
Describe the symptom and your neighborhood, and we will tell you when a technician can get there.
Often, yes, especially if you call early in the day. It depends on the schedule and on the parts your model is likely to need, so the real answer comes when you call (703) 468-4416 and we check what's open. Calls late in the evening are usually booked for the next day.
We carry the parts that fail most often on common platforms, which is why we ask for the model number when you book. Dacor shares many parts with the Samsung family, so availability is usually good even for older models. If a part must be ordered, you hear the lead time with the quote.
Usually. Dacor builds for a long service life and keeps parts available for years, so a single failed component on a ten- or fifteen-year-old Dacor stove normally leaves plenty worth saving. If it is built into cabinetry, the case for repair is stronger still, because replacing it means carpentry too. You get the repair price and an honest view of the alternative, and the choice is yours.