Maytag · Foggy Bottom & West End
Maytag Washer Repair in Foggy Bottom & West End
A broken Maytag washer in 20037 or 20006? We test it in place, explain what failed and agree a price before any repair.
Open 24/7 · a person picks up
Maytag Washers in DC Homes
TrueFix Washington DC sends technicians to Maytag washers across Foggy Bottom & West End. Read us the model and serial numbers from the rating plate when you book; it lets us check parts availability before the visit. Repairs use manufacturer-specified parts by default and carry our 90-day parts & 30-day labor warranty.
How a Maytag Washer Repair Visit Works
Related Services
More repairs we handle in homes and businesses across Washington, DC.
Maytag Washer Faults We Repair
A symptom can trace back to more than one part, which is why we test before quoting.
- Not Spinning
- Not Draining
- Making Loud Noise
- Won't Start
- Leaking Water
- Not Filling with Water
- Door Won't Lock
- Vibrating Excessively
- Error Codes Displayed
- Not Agitating
- Clothes Not Getting Clean
- Washer Smells Bad
- Mold in Drum or Gasket
- Musty Odor Transferring to Clothes
- Door Gasket Mold
- Not Rinsing Properly
- Too Much Suds / Oversudsing
- Detergent Not Dispensing
- Fabric Softener Not Dispensing
- Bleach Dispenser Clogged
- Spin Cycle Stopping Early
- Not Completing Full Cycle
- Cycle Taking Too Long
- Pausing Mid-Cycle
- Filling Too Slowly
- Overfilling with Water
- Standing Water After Cycle
- Not Draining Completely
- Grinding Noise During Wash
- Banging Noise During Spin
- Squealing Noise
- Clicking Noise During Cycle
- Burning Smell from Washer
- Door Won't Open After Cycle
- Door Glass Cracked or Broken
- Door Seal / Gasket Torn or Damaged
- Leaking from Bottom
- Leaking from Door
- Leaking from Back of Washer
- Leaking from Detergent Drawer
- Drum Not Turning
- Agitator Not Working
- Agitator Dogs / Cogs Worn Out
- Drum Bearing Making Noise
- Drive Belt Broken
- Motor Failure
- Drain Pump Failure
- Water Inlet Valve Failure
- Lid Switch / Lock Failure
- Control Board Failure
- Water Temperature Wrong
- Washing Cold Only / No Hot Water
- Clothes Getting Damaged in Washer
- Tearing or Ripping Clothes
- Clothes Coming Out Tangled
- Soap Residue on Clothes
- Fabric Softener Spots on Clothes
- Rust Stains on Clothes
- Washer Won't Turn On
- Display / Control Panel Not Working
- Buttons Not Responding
- Pausing Randomly During Cycle
- Tripping Circuit Breaker
- Shaking the Floor During Spin
- Washer Moving Across Floor During Spin
- Not Balancing Load During Spin
- UE / Unbalance Error (LG)
- OE / Drain Error (LG)
- LE / Motor Error (LG)
- DE / Door Error (LG)
- 5E / SE Drain Error (Samsung)
- F21 Drain Error (Whirlpool)
- F5 / dL Lid Lock Error (Whirlpool / GE)
- Drum Bearing Replacement Needed
- Shock Absorbers Worn Out
- Spider Arm / Drum Support Broken
- Pump Filter Clogged
More Maytag Repairs in Foggy Bottom & West End
Notes on Maytag washer service
Looking for Maytag washer repair in Foggy Bottom & West End? Expect about 1–2 hours on site and a price, typically $150–$400, that is fixed once you approve it.
Appliance calls in Foggy Bottom & West End are rarely simple. The buildings are old, the kitchens inside them have been redone more than once, and getting to the machine can mean narrow stairs, a shared hallway or a building manager. Our route in follows Pennsylvania Avenue, New Hampshire Avenue and 23rd Street.
Here is how a washer gets diagnosed: the installation items first, meaning hoses, standpipe, leveling and supply valves, before anything inside the cabinet is opened. It also helps to know that pre-2006 Maytag machines, including older Neptune front-loaders, are still running in some basements; mechanical parts for them are often findable, but original control boards can be scarce, so availability is checked before anything is promised.
When you call (703) 468-4416 about a repair in Foggy Bottom & West End, we'll ask for the model number so the likely parts travel with the technician. That, more than anything, decides whether the job finishes on the first visit. We serve both ZIP codes here.
The Maytag washer platform
On a Maytag washer, the error code is a starting point. Most faults we find are mechanical, such as a blocked pump, a worn coupler or a failed lock, rather than the control board the code seems to suggest. Under the Whirlpool umbrella, Maytag uses many of the same components as its sibling brands, which keeps most parts within reach. Maytag top-loaders built on the Whirlpool platform share its lid locks, couplers and drive parts, which keeps most repairs straightforward. Stacked and compact 24-inch washers are common in apartments, garden condos and rowhouse closets around DC, and we service both.
It is also true that Maytag dryers share Whirlpool's heating, airflow and safety-fuse layout, so a Maytag that will not heat gets the same vent-first diagnosis. Details like that are why we ask for the model number up front.
Common Maytag washer faults
Our starting list for a Maytag washer: door boot tears and mold; inlet valve scale and fill faults; shock absorber and suspension wear causing vibration; tub bearing wear showing up first as noise in spin; drain pump blockages from small items and lint. It reflects how this particular platform tends to fail.
Knowing the list narrows the search on a Maytag washer but doesn't replace testing. Two of those faults can produce the same complaint, and confirming which one it is keeps you from paying for the wrong part.
Before you buy a part for your Maytag washer
Before buying parts online, consider how often the obvious answer is wrong. With a washer, the classic example is a front-loader that smells musty, blamed on the machine failing when it is usually residue and moisture trapped in the door gasket and pump filter.
On a Maytag washer, a meter reading or a test run settles the question in a few minutes, which is far cheaper than a part bought on a hunch.
How Foggy Bottom & West End housing shapes a washer repair
Condo and rental buildings in Foggy Bottom & West End often put the same appliance package into every unit, so when a model has a known weak spot we have usually seen it before. Condensing and heat-pump dryers are common, and they fail differently from vented ones: the lint ends up in a condenser or heat exchanger, not a duct.
Something that shapes washer repairs around here: moderately hard Potomac water, which leaves scale on inlet screens and valves over the years, slowly stretching fill times. It is one reason we ask a few questions when you book. Knowing whether a Maytag washer is in a basement, a closet, a high-rise unit or a detached house tells the technician what to bring besides parts.
Compact and stacked appliances in Foggy Bottom & West End
Stacked laundry in a closet in Foggy Bottom & West End often has inches to spare on each side, so the drain hose, supply hoses and dryer duct are routed where nobody can see them. A slow leak there can run for weeks before it shows up as a stain on the ceiling below.
If someone lives under you, a drip pan beneath the washer and braided stainless supply hoses are worth having. Whenever we service a stacked pair we check the hoses and drain connection, because a leak into the unit below costs far more than the repair.
What to have ready when you call about your Maytag washer
Before you call (703) 468-4416, it helps to note when the problem started, whether it is constant or comes and goes, and any code on the display. Those details often point straight at the cause on a Maytag washer.
If you have a parking pass, a driveway or a loading dock, mention it; street parking can eat into the visit. The Maytag washer repair itself is quoted once, after diagnosis, and backed by our 90-day parts and 30-day labor warranty.
Maytag washer repair, in numbers
Maytag Washer Questions
Want to talk it through?
Describe the symptom and your neighborhood, and we will tell you when a technician can get there.
Yes. Many buildings in Washington, DC require a certificate of insurance and a reserved service elevator before a contractor comes in. Give us the building name or address when you call (703) 468-4416 and we'll arrange it with management ahead of time. We also service the compact and stacked appliances these buildings tend to use.
About 1–2 hours on site for a typical repair, including diagnosis. Built-in installations take longer because the unit has to come out of the cabinetry safely. If a part needs ordering, the return visit is booked before the technician leaves.
We carry the parts that fail most often on common platforms, which is why we ask for the model number when you book. Maytag shares many parts with the Whirlpool family, so availability is usually good even for older models. If a part must be ordered, you hear the lead time with the quote.