Call Now
Maytag · Dupont Circle & Logan Circle appliance repair

Maytag · Dupont Circle & Logan Circle

Maytag Washer Repair in Dupont Circle & Logan Circle

A broken Maytag washer in 20036 or 20005? We test it in place, explain what failed and agree a price before any repair.

Rowhouses, condos and detached homesSame-day visits when the route allows90-Day Parts & 30-Day Labor WarrantyPrice approved before any work
(703) 468-4416

Open 24/7 · a person picks up

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (703) 468-4416

90 / 30 Days
Warranty: parts / labor
All 8
DC Wards Served

Brands We Repair

Samsung appliance repairLG appliance repairWhirlpool appliance repairGE appliance repairBosch appliance repairMaytag appliance repairFrigidaire appliance repairElectrolux appliance repairKenmore appliance repairAmana appliance repairSpeed Queen appliance repairMiele appliance repairFisher & Paykel appliance repair
Appliance Repair in Washington, DC

Maytag Washers in DC Homes

TrueFix Washington DC sends technicians to Maytag washers across Dupont Circle & Logan Circle. Read us the model and serial numbers from the rating plate when you book; it lets us check parts availability before the visit. Repairs use manufacturer-specified parts by default and carry our 90-day parts & 30-day labor warranty.

Manufacturer-Specified Parts
The part the maker lists for your model, unless you choose otherwise
Building-Friendly Visits
Tell us your building's access rules and we plan around them
Flexible Scheduling
Phones: Open 24/7
Price Set Before Work
The quote you approve is the price you pay for that repair

How a Maytag Washer Repair Visit Works

01
Describe the Problem
Use the form or call (703) 468-4416
02
Pick a Visit Time
Same day if a route has room, otherwise the next opening
03
Diagnosis, Then Price
Nothing is replaced until you say yes
04
Repair and Run It
We run a full cycle before packing up

Maytag Washer Faults We Repair

A symptom can trace back to more than one part, which is why we test before quoting.

  • Not Spinning
  • Not Draining
  • Making Loud Noise
  • Won't Start
  • Leaking Water
  • Not Filling with Water
  • Door Won't Lock
  • Vibrating Excessively
  • Error Codes Displayed
  • Not Agitating
  • Clothes Not Getting Clean
  • Washer Smells Bad
  • Mold in Drum or Gasket
  • Musty Odor Transferring to Clothes
  • Door Gasket Mold
  • Not Rinsing Properly
  • Too Much Suds / Oversudsing
  • Detergent Not Dispensing
  • Fabric Softener Not Dispensing
  • Bleach Dispenser Clogged
  • Spin Cycle Stopping Early
  • Not Completing Full Cycle
  • Cycle Taking Too Long
  • Pausing Mid-Cycle
  • Filling Too Slowly
  • Overfilling with Water
  • Standing Water After Cycle
  • Not Draining Completely
  • Grinding Noise During Wash
  • Banging Noise During Spin
  • Squealing Noise
  • Clicking Noise During Cycle
  • Burning Smell from Washer
  • Door Won't Open After Cycle
  • Door Glass Cracked or Broken
  • Door Seal / Gasket Torn or Damaged
  • Leaking from Bottom
  • Leaking from Door
  • Leaking from Back of Washer
  • Leaking from Detergent Drawer
  • Drum Not Turning
  • Agitator Not Working
  • Agitator Dogs / Cogs Worn Out
  • Drum Bearing Making Noise
  • Drive Belt Broken
  • Motor Failure
  • Drain Pump Failure
  • Water Inlet Valve Failure
  • Lid Switch / Lock Failure
  • Control Board Failure
  • Water Temperature Wrong
  • Washing Cold Only / No Hot Water
  • Clothes Getting Damaged in Washer
  • Tearing or Ripping Clothes
  • Clothes Coming Out Tangled
  • Soap Residue on Clothes
  • Fabric Softener Spots on Clothes
  • Rust Stains on Clothes
  • Washer Won't Turn On
  • Display / Control Panel Not Working
  • Buttons Not Responding
  • Pausing Randomly During Cycle
  • Tripping Circuit Breaker
  • Shaking the Floor During Spin
  • Washer Moving Across Floor During Spin
  • Not Balancing Load During Spin
  • UE / Unbalance Error (LG)
  • OE / Drain Error (LG)
  • LE / Motor Error (LG)
  • DE / Door Error (LG)
  • 5E / SE Drain Error (Samsung)
  • F21 Drain Error (Whirlpool)
  • F5 / dL Lid Lock Error (Whirlpool / GE)
  • Drum Bearing Replacement Needed
  • Shock Absorbers Worn Out
  • Spider Arm / Drum Support Broken
  • Pump Filter Clogged

Washer Brands We Fix in Dupont Circle & Logan Circle

Samsung logoLG logoWhirlpool logoGE Appliances logoMaytag logoBosch logoFrigidaire logoKenmore logoAmana logoElectrolux logoMiele logoAdmiral logoASKO logoAvanti logoBlomberg logoFisher & Paykel logoHotpoint logoRoper logoSpeed Queen logo

More Maytag Repairs in Dupont Circle & Logan Circle

Maytag Washer · Dupont Circle & Logan Circle

Notes on Maytag washer service

Maytag washer repair in Dupont Circle & Logan Circle, diagnosed on site and quoted at one price before any work starts. Most washer repairs come to $150–$400 and take 1–2 hours.

Dupont Circle & Logan Circle is close-in Washington, DC: permit parking, loading zones that fill early, and a lot of work on upper floors. We reach it along Connecticut Avenue, Massachusetts Avenue, P Street and 14th Street. A model number at booking does more than anything else to get the job finished on the first trip.

Our washer diagnosis follows a sequence: draining first, then filling, then the drive system, because most washers that refuse to spin are actually failing to drain, and a pump filter or hose blockage costs far less than a motor. It is the cheapest route to the right answer. It also helps to know that pre-2006 Maytag machines, including older Neptune front-loaders, are still running in some basements; mechanical parts for them are often findable, but original control boards can be scarce, so availability is checked before anything is promised.

Three things make booking in Dupont Circle & Logan Circle faster: the model number, a short description of what the appliance is doing, and any building or parking details. Call (703) 468-4416 and we'll find a time. Our coverage here takes in both ZIP codes.

How Maytag builds its washers

On a Maytag washer, the error code is a starting point. Most faults we find are mechanical, such as a blocked pump, a worn coupler or a failed lock, rather than the control board the code seems to suggest. Under the Whirlpool umbrella, Maytag uses many of the same components as its sibling brands, which keeps most parts within reach. Maytag top-loaders built on the Whirlpool platform share its lid locks, couplers and drive parts, which keeps most repairs straightforward. Stacked and compact 24-inch washers are common in apartments, garden condos and rowhouse closets around DC, and we service both.

It is also true that Maytag dryers share Whirlpool's heating, airflow and safety-fuse layout, so a Maytag that will not heat gets the same vent-first diagnosis. Details like that are why we ask for the model number up front.

Common Maytag washer faults

Our starting list for a Maytag washer: shock absorber and suspension wear causing vibration; tub bearing wear showing up first as noise in spin; drain pump blockages from small items and lint; door boot tears and mold; inlet valve scale and fill faults. It reflects how this particular platform tends to fail.

Several of these share symptoms, so the order of testing matters. Starting with the inexpensive possibilities keeps a Maytag washer repair from costing more than it should.

Before you buy a part for your Maytag washer

Before buying parts online, consider how often the obvious answer is wrong. With a washer, the classic example is a loud bang during spin, read as a dying motor, that is often a worn shock absorber, a suspension rod or simply an off-balance load.

On a Maytag washer, a meter reading or a test run settles the question in a few minutes, which is far cheaper than a part bought on a hunch.

How Dupont Circle & Logan Circle housing shapes a washer repair

Dupont Circle & Logan Circle has no single housing type. Rowhouses, apartment buildings, newer condos and detached houses can all be a short walk apart, so we ask about the building as well as the appliance when you book.

Something that shapes washer repairs around here: moderately hard Potomac water, which leaves scale on inlet screens and valves over the years, slowly stretching fill times. It is one reason we ask a few questions when you book. Knowing whether a Maytag washer is in a basement, a closet, a high-rise unit or a detached house tells the technician what to bring besides parts.

How a repair is priced in Dupont Circle & Logan Circle

Every visit in Dupont Circle & Logan Circle follows the same order: diagnose, explain, price, then repair only if you agree. The price you approve covers parts and labor for that fix and doesn't change once the panels are off.

If we come across a second problem while we're working, we stop and tell you before doing anything about it. You get a choice, not a surprise at the end.

How to schedule Maytag washer service

Before you call (703) 468-4416, it helps to note when the problem started, whether it is constant or comes and goes, and any code on the display. Those details often point straight at the cause on a Maytag washer.

If you have a parking pass, a driveway or a loading dock, mention it; street parking can eat into the visit. The Maytag washer repair itself is quoted once, after diagnosis, and backed by our 90-day parts and 30-day labor warranty.

Maytag washer repair, in numbers

$150–$400
Typical repair cost
1–2 hours
Typical time on site
2
ZIP codes covered
90 / 30 Days
Warranty: parts / labor
FAQ

Maytag Washer Questions

Want to talk it through?

Describe the symptom and your neighborhood, and we will tell you when a technician can get there.

Often, yes, especially if you call early in the day. It depends on the schedule and on the parts your model is likely to need, so the real answer comes when you call (703) 468-4416 and we check what's open. Calls late in the evening are usually booked for the next day.

We carry the parts that fail most often on common platforms, which is why we ask for the model number when you book. Maytag shares many parts with the Whirlpool family, so availability is usually good even for older models. If a part must be ordered, you hear the lead time with the quote.

Most repairs fall in the $150–$400 range. A switch, valve, pump or element sits at the low end; a control board or sealed-system repair sits at the top. You get the exact figure after diagnosis and before work starts.

CallBook