Call Now
Frigidaire · Anacostia & Hillcrest appliance repair

Frigidaire · Anacostia & Hillcrest

Frigidaire Oven Repair in Anacostia & Hillcrest

A broken Frigidaire oven in 20020? We test it in place, explain what failed and agree a price before any repair.

Rowhouses, condos and detached homesSame-day visits when the route allows90-Day Parts & 30-Day Labor WarrantyPrice approved before any work
(703) 468-4416

Open 24/7 · a person picks up

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (703) 468-4416

90 / 30 Days
Warranty: parts / labor
All 8
DC Wards Served

Brands We Repair

Samsung appliance repairLG appliance repairWhirlpool appliance repairGE appliance repairBosch appliance repairMaytag appliance repairKitchenAid appliance repairFrigidaire appliance repairElectrolux appliance repairKenmore appliance repairAmana appliance repairMiele appliance repairViking appliance repairThermador appliance repairWolf appliance repairJennAir appliance repairDacor appliance repairSmeg appliance repairFisher & Paykel appliance repair
Appliance Repair in Washington, DC

Frigidaire Ovens in DC Homes

TrueFix Washington DC sends technicians to Frigidaire ovens across Anacostia & Hillcrest. Read us the model and serial numbers from the rating plate when you book; it lets us check parts availability before the visit. Repairs use manufacturer-specified parts by default and carry our 90-day parts & 30-day labor warranty.

Manufacturer-Specified Parts
The part the maker lists for your model, unless you choose otherwise
Building-Friendly Visits
Tell us your building's access rules and we plan around them
Flexible Scheduling
Phones: Open 24/7
Price Set Before Work
The quote you approve is the price you pay for that repair

How a Frigidaire Oven Repair Visit Works

01
Describe the Problem
Use the form or call (703) 468-4416
02
Pick a Visit Time
Same day if a route has room, otherwise the next opening
03
Diagnosis, Then Price
Nothing is replaced until you say yes
04
Repair and Run It
We run a full cycle before packing up

Frigidaire Oven Faults We Repair

A symptom can trace back to more than one part, which is why we test before quoting.

  • Oven Not Heating
  • Uneven Heating
  • Door Won't Close Properly
  • Self-Clean Not Working
  • Burner Not Working
  • Display / Control Issue
  • Oven Temperature Inaccurate
  • Gas Smell from Oven
  • Bake Element Burned Out
  • Broil Element Burned Out
  • Gas Igniter Not Glowing
  • Gas Oven Burner Not Lighting
  • Temperature Sensor Failure
  • Control Board Failure
  • Self-Clean Cycle Not Working
  • Oven Door Lock Failure
  • Oven Door Not Closing Properly
  • Door Hinge Broken
  • Oven Door Glass Cracked or Broken
  • Door Gasket Worn or Damaged
  • Convection Fan Not Working
  • Convection Fan Making Noise
  • Broiler Not Working
  • Bake Not Reaching Temperature
  • Oven Running Too Hot
  • Error Code Displayed
  • F2 / F3 Error Code — Over-Temperature
  • F7 Error — Shorted Key Button
  • Oven Light Not Working
  • Clock or Display Not Working
  • Beeping Constantly
  • Warming Drawer Not Heating
  • Oven Smoking Excessively
  • Gas Burner Ignition Issues
  • Continuous Clicking When Not in Use
  • Spark Igniter Failure
  • Griddle Not Heating Properly
  • Oven Door Hard to Open or Close
  • Oven Preheating Too Slowly
  • Uneven Baking Results
  • Electric Oven Tripping Breaker
  • Range Hood Not Working
  • Bake Element with Visible Damage
  • Oven / Range Not Level
  • Oven Rack Stuck or Difficult to Slide
  • Warming Zone Not Maintaining Temperature
  • Cooling Fan Runs After Oven Is Off
  • Oven Door Window Fogged or Cloudy
  • One Oven Not Working (Double Oven)
  • Numeric Error Code (F-Code)
  • Oven Taking 30+ Minutes to Preheat
  • Igniter Glows But No Ignition
  • Oven Door Falls Open or Won't Stay at 45 Degrees
  • Broiler Pan / Drip Pan Missing or Damaged
  • Meat Probe / Temperature Probe Not Working
  • Gas Smell After Cooking
  • Oven Continues Heating When Turned Off
  • Excessive Smoke During Self-Clean
  • Gas Oven Igniter Not Glowing At All
  • Oven Light Flickering During Operation
  • Clock Won't Set After Power Outage
  • Dual-Fuel Range Issue
  • Oven Fan Making Noise — Not Convection Related
  • Oven Heating Unevenly During Preheat
  • Oven Thermal Fuse Blown
  • Oven Controls Locked After Self-Clean
  • Chemical Burn-Off Smell from New Oven
  • New Igniter Installed But Oven Still Not Lighting
  • Bake Element Sparking or Arcing
  • Oven Not Baking Evenly (Hot Spots)
  • Self-Clean Timer Not Completing
  • Convection Setting Not Working Properly
  • Oven Display Dim or Partially Dark
  • Food Burning on Bottom Before Top Is Done
  • Oven Gas Smell When Unit Is Off

Oven Brands We Fix in Anacostia & Hillcrest

Samsung logoLG logoWhirlpool logoGE Appliances logoMaytag logoBosch logoKitchenAid logoFrigidaire logoViking logoKenmore logoAmana logoElectrolux logoMiele logoThermador logoWolf logoAdmiral logoAGA logoAvanti logoBertazzoni logoBlomberg logoDacor logoDCS logoFisher & Paykel logoGaggenau logoHotpoint logoJennAir logoLa Cornue logoRoper logoSmeg logoThor Kitchen logoVulcan logo

More Frigidaire Repairs in Anacostia & Hillcrest

Frigidaire Oven · Anacostia & Hillcrest

Notes on Frigidaire oven service

Looking for Frigidaire oven repair in Anacostia & Hillcrest? Expect about 1–2 hours on site and a price, typically $150–$450, that is fixed once you approve it.

One detail specific to Anacostia & Hillcrest: Historic Anacostia's small nineteenth-century frame houses have tight kitchens and steep stairs, Fairlawn has a lot of garden apartments, and up the hill Hillcrest, Randle Highlands and Penn Branch are streets of detached brick houses with full basements.

On a Frigidaire oven we work in a set order: the temperature sensor and the bake element or gas igniter first, then the door seal and hinges, then the control board. Specific to Frigidaire: Frigidaire ranges often come in for a failed bake element, a drifting oven sensor or, on gas models, a weak oven igniter, all routine parts with good availability.

Our Anacostia & Hillcrest coverage takes in the whole ZIP code. Street parking is tight and much of it is zoned for residents, so if you have a driveway, alley access or a visitor pass, mention it when you call (703) 468-4416.

How Frigidaire builds its ovens

A Frigidaire oven holds temperature by cycling its heat source against a sensor, so a fault can sit in the element or igniter, the sensor, the relay that switches them, or the door that keeps the heat in. Frigidaire shares engineering with other Electrolux brands, so a lot of its parts cross-reference and are easy to source. Parts for mainstream Frigidaire models are widely available, so most repairs finish quickly once the fault is confirmed.

One more point: on Frigidaire side-by-side and French-door refrigerators, ice and water dispenser complaints often come down to the fill valve, a frozen fill tube or the wiring that runs through the door hinge rather than the dispenser itself.

What actually fails on a Frigidaire oven

When a Frigidaire oven comes in for repair, the cause is most often one of these: door gaskets and hinge springs letting heat escape; bake and broil element failures; door lock faults after self-clean; glow-bar igniters too weak to open the gas valve; control relays failing on heating circuits.

A symptom still doesn't identify the fault, so we diagnose on site rather than quoting from a phone description. The same complaint on a Frigidaire oven can come from parts with very different prices.

The oven fault people misread

A common trap with Frigidaire ovens is an oven that runs consistently hot or cool by the same amount, which is often an adjustable calibration offset rather than a failed thermostat. Ordering a part based on that first impression is how people end up with a new component and the same problem.

So the technician tests before naming a part. Once the failed component is confirmed, you get one price for the oven repair, and nothing is touched until you agree to it.

Your oven and the space around it

Anacostia & Hillcrest has no single housing type. Rowhouses, apartment buildings, newer condos and detached houses can all be a short walk apart, so we ask about the building as well as the appliance when you book.

Something that shapes oven repairs around here: older rowhouse kitchens, where the oven may run on a gas line or an electrical circuit older than the appliance, so the supply is checked along with the oven. We plan around it: how a Frigidaire oven would be moved if it has to be, whether the building needs notice, and what the hookups behind it look like.

Basement appliances in Anacostia & Hillcrest

A lot of the District's laundry lives below grade, including in many Anacostia & Hillcrest homes. Basements are humid in summer, and after heavy storms some low-lying blocks and older sewer connections can let water in. Appliances standing on the floor take the worst of it.

If a washer, dryer or freezer has been sitting in water, don't switch it back on. Motors, boards and wiring can be damaged in ways you can't see, and we'd rather inspect it than have it fail under power. Raising basement appliances on a platform is a cheap precaution.

Booking Frigidaire oven repair in Anacostia & Hillcrest

To book, call (703) 468-4416. We'll ask what the Frigidaire oven is doing, how old it is and where it sits in the home, since a basement, a closet and a fourth-floor condo each call for a little different planning.

Nothing on the Frigidaire oven is taken apart until you have approved a price. If parts have to be ordered, you hear the lead time with the quote and the return visit is booked before the technician leaves.

Frigidaire oven repair, in numbers

$150–$450
Typical repair cost
1–2 hours
Typical time on site
1
ZIP code covered
90 / 30 Days
Warranty: parts / labor
FAQ

Frigidaire Oven Questions

Want to talk it through?

Describe the symptom and your neighborhood, and we will tell you when a technician can get there.

It depends on the fault and the age. Mechanical repairs on a Frigidaire oven, such as pumps, valves, switches, elements, belts and fan motors, are usually well worth doing. A control board or sealed-system failure on an older unit is a closer call, and we will tell you plainly if replacing makes more sense.

About 1–2 hours on site for a typical repair, including diagnosis. Built-in installations take longer because the unit has to come out of the cabinetry safely. If a part needs ordering, the return visit is booked before the technician leaves.

CallBook