Call Now
Maytag · Old Town Alexandria appliance repair

Maytag · Old Town Alexandria

Maytag Dryer Repair in Old Town Alexandria

A broken Maytag dryer in 22314? We test it in place, explain what failed and agree a price before any repair.

Rowhouses, condos and detached homesSame-day visits when the route allows90-Day Parts & 30-Day Labor WarrantyPrice approved before any work
(703) 468-4416

Open 24/7 · a person picks up

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (703) 468-4416

90 / 30 Days
Warranty: parts / labor
Same Day
Visits Often Available

Brands We Repair

Samsung appliance repairLG appliance repairWhirlpool appliance repairGE appliance repairBosch appliance repairMaytag appliance repairFrigidaire appliance repairElectrolux appliance repairKenmore appliance repairAmana appliance repairSpeed Queen appliance repairMiele appliance repairFisher & Paykel appliance repair
Appliance Repair in Alexandria, VA

Maytag Dryers in DC Homes

TrueFix Washington DC sends technicians to Maytag dryers across Old Town Alexandria. Read us the model and serial numbers from the rating plate when you book; it lets us check parts availability before the visit. Repairs use manufacturer-specified parts by default and carry our 90-day parts & 30-day labor warranty.

Manufacturer-Specified Parts
The part the maker lists for your model, unless you choose otherwise
Building-Friendly Visits
Tell us your building's access rules and we plan around them
Flexible Scheduling
Phones: Open 24/7
Price Set Before Work
The quote you approve is the price you pay for that repair

How a Maytag Dryer Repair Visit Works

01
Describe the Problem
Use the form or call (703) 468-4416
02
Pick a Visit Time
Same day if a route has room, otherwise the next opening
03
Diagnosis, Then Price
Nothing is replaced until you say yes
04
Repair and Run It
We run a full cycle before packing up

Maytag Dryer Faults We Repair

A symptom can trace back to more than one part, which is why we test before quoting.

  • Not Heating
  • Drum Not Tumbling
  • Takes Too Long to Dry
  • Making Loud Noise
  • Won't Start
  • Dryer Overheating
  • Not Drying Clothes
  • Shutting Off Early
  • Not Getting Hot Enough
  • Taking Too Long to Dry
  • Thermal Fuse Blown
  • Heating Element Burned Out
  • Gas Igniter Not Working
  • Gas Valve Solenoid Failure
  • Flame Sensor / Radiant Sensor Failure
  • Blower Wheel Clogged with Lint
  • Exhaust Duct Clogged
  • Restricted Exhaust Airflow
  • Dryer Venting Improperly
  • Drive Belt Broken
  • Drum Rollers Worn Out
  • Drum Glide / Bearing Worn
  • Idler Pulley Seized
  • Drive Motor Failure
  • Making Loud Noise During Operation
  • Squealing Noise During Tumble
  • Thumping or Banging Noise
  • Rattling Noise
  • Control Board Failure
  • Cycling Thermostat Failure
  • High-Limit Thermostat Failure
  • Moisture Sensor Failure
  • Dryer Door Not Closing Properly
  • Door Switch Failure
  • Lint Trap / Screen Damaged
  • Start Button Not Working
  • Dryer Won't Turn On
  • Tripping Circuit Breaker
  • Burning Smell
  • Clothes Shrinking
  • Clothes Still Wet After Full Cycle
  • Clothes Damp but Warm After Cycle
  • Auto-Dry Sensor Not Working
  • Timer Not Advancing
  • Electric Dryer No Heat — Partial Power
  • Gas Smell from Gas Dryer
  • Display Panel Not Working
  • Buttons Not Responding
  • Won't Spin at All
  • Stops Mid-Cycle
  • Heat Setting Not Changing
  • Excessive Energy Use
  • Excessive Static on Clothes
  • Clothes Heavily Wrinkled
  • Steam Function Not Working
  • Moisture Sensor Needs Cleaning
  • Exhaust Hose Kinked
  • Exterior Too Hot to Touch
  • Wrinkle-Prevent Tumble Not Working
  • Requires Two or More Cycles to Dry
  • Error Code on Display
  • Low Gas Pressure to Dryer
  • Drum Interior Light Not Working
  • Door Handle Broken
  • Auto-Dry Cycle Runs All Night
  • Gas Burner Orifice Clogged
  • Lint Fire Hazard in Ductwork
  • Timer Advancing Too Slowly
  • Three-Prong Outlet / Four-Prong Cord Mismatch
  • Knocking at Startup
  • Intermittent Squeaking
  • Bird or Pest Nest in Dryer Duct
  • Cycling Thermostat Stuck Closed
  • Gas Valve Solenoid Kit Needed
  • Thermal Cutout Needs Resetting

Dryer Brands We Fix in Old Town Alexandria

Samsung logoLG logoWhirlpool logoGE Appliances logoMaytag logoBosch logoFrigidaire logoKenmore logoAmana logoElectrolux logoMiele logoAdmiral logoASKO logoAvanti logoBlomberg logoFisher & Paykel logoHotpoint logoRoper logoSpeed Queen logo
Maytag Dryer · Old Town Alexandria

Notes on Maytag dryer service

We repair Maytag dryers throughout Old Town Alexandria. A typical visit takes 1–2 hours, diagnosis included, and the price is agreed before anything is taken apart.

The local factor we plan around in Old Town Alexandria is that Old Town's eighteenth- and nineteenth-century rowhouses sit in the Old and Historic Alexandria District, where the Board of Architectural Review governs exterior changes, so a new dryer vent or hood duct through the facade is slow to approve, and the blocks near the foot of King Street and along Union Street flood in storms and very high tides, which matters for anything on a basement floor.

On a Maytag dryer we work in a set order: drum support first on a noisy machine (rollers, belt, idler) and airflow first on a slow one, since those two complaints almost never share a cause. On the brand side, Maytag dryers share Whirlpool's heating, airflow and safety-fuse layout, so a Maytag that will not heat gets the same vent-first diagnosis.

Our Old Town Alexandria coverage takes in the whole ZIP code. Street parking is tight and much of it is zoned for residents, so if you have a driveway, alley access or a visitor pass, mention it when you call (703) 468-4416.

What sets the Maytag dryer apart

When a Maytag dryer stops heating or takes forever, we check the vent along with the dryer, because a new part fitted to a dryer with a blocked duct fails the same way as the old one. Maytag shares engineering with other Whirlpool brands, so a lot of its parts cross-reference and are easy to source. The usual Maytag parts are inexpensive, which keeps most of these repairs well worth doing.

One more point: Maytag has belonged to Whirlpool since 2006, so a current Maytag washer, dryer or dishwasher shares its platform and most of its parts with the Whirlpool equivalent.

What actually fails on a Maytag dryer

On Maytag dryers, these are the failures that come up again and again: door switch and catch failures; heating element or gas igniter failures; restricted exhaust causing long drying times and overheating; moisture sensors coated with softener residue; thermal fuse and high-limit thermostat trips.

Knowing the list narrows the search on a Maytag dryer but doesn't replace testing. Two of those faults can produce the same complaint, and confirming which one it is keeps you from paying for the wrong part.

The dryer fault people misread

One symptom sends more Maytag dryer owners in the wrong direction than any other: a dryer that needs two or three cycles to dry a load, blamed on the heating element when the heat is fine and the exhaust duct is clogged.

So the technician tests before naming a part. Once the failed component is confirmed, you get one price for the dryer repair, and nothing is touched until you agree to it.

Old Town Alexandria and your Maytag dryer

Most rowhouses in Old Town Alexandria were built around a century ago, some much earlier, and have been renovated in pieces since. The result is modern appliances tied into older drains, shared circuits and long vent runs. Many also have an English basement unit, which can mean two kitchens and two sets of laundry in one building.

Dryer calls in Old Town Alexandria often involve long vent runs in rowhouses, which often travel the length of a basement or through a closet to reach the rear wall and collect lint at every bend. We plan around it: how a Maytag dryer would be moved if it has to be, whether the building needs notice, and what the hookups behind it look like.

Water, scale and filters in Old Town Alexandria

Water in Old Town Alexandria comes from Virginia American Water, which buys it already treated from Fairfax Water, drawn from the Potomac River and the Occoquan Reservoir. It's a different system from DC's and Arlington's, but inside an appliance the pattern is familiar: over years, minerals settle on heating elements, inlet valves and ice maker tubing.

Scale builds slowly, so the symptom usually looks like something else: a dishwasher that stops drying well, an ice maker making small or hollow cubes, a dispenser that trickles. We check inlet screens and valves before blaming a control board, and if your dishwasher has a water-hardness setting, we'll set it to suit local water while we're there.

Booking Maytag dryer repair in Old Town Alexandria

The quickest way to book Maytag dryer repair is to call (703) 468-4416. Have the model number handy if you can, plus anything the display is showing. A photo of the rating label works just as well.

The price is agreed after diagnosis and before work starts, and the repair is covered by our 90-day parts and 30-day labor warranty. If the Maytag dryer isn't worth fixing, we say so instead of quoting the job.

Maytag dryer repair, in numbers

$100–$350
Typical repair cost
1–2 hours
Typical time on site
1
ZIP code covered
90 / 30 Days
Warranty: parts / labor
FAQ

Maytag Dryer Questions

Want to talk it through?

Describe the symptom and your neighborhood, and we will tell you when a technician can get there.

Often, yes, especially if you call early in the day. It depends on the schedule and on the parts your model is likely to need, so the real answer comes when you call (703) 468-4416 and we check what's open. Calls late in the evening are usually booked for the next day.

We install manufacturer-specified parts by default. If an original Maytag part has been discontinued, we can source a compatible equivalent and will tell you which you are getting before it goes in. Either way the repair carries our 90-day parts and 30-day labor warranty. Maytag shares parts with the Whirlpool family, so equivalents are usually available even for older units.

Most repairs fall in the $100–$350 range. A switch, valve, pump or element sits at the low end; a control board or sealed-system repair sits at the top. You get the exact figure after diagnosis and before work starts.

CallBook