Call Now

Ice Maker Repair

Ice Maker Repair in Capitol Hill & Navy Yard

We service undercounter and freestanding residential ice machines, clear-ice and nugget models, and the commercial cubers used in restaurants and bars. Descaling and sanitizing, water pumps, inlet valves, drain pumps, bin controls, harvest components and condenser fans make up most repairs. We cover 20003, and same-day visits are often possible.

Rowhouses, condos and detached homesSame-day visits when the route allows90-Day Parts & 30-Day Labor WarrantyPrice approved before any work
1–2 hours
Repair time
90 / 30 Days
Warranty
(703) 468-4416

Open 24/7 · a person picks up

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (703) 468-4416

90 / 30 Days
Warranty: parts / labor
All 8
DC Wards Served

Ice Maker Service Area in Capitol Hill & Navy Yard

The ZIP code this route covers

  • 20003

Ice Maker Brands We Fix

9 manufacturers that make this appliance

Sub-Zero logoAtosa logoHoshizaki logoIce-O-Matic logoManitowoc logoMaxx Ice logoPerlick logoScotsman logoU-Line logo
Ice Maker · Capitol Hill & Navy Yard

Ice Maker problems we see in Capitol Hill

Capitol Hill & Navy Yard runs from old residential blocks down to the riverfront, and we reach it along Pennsylvania Avenue SE, 8th Street SE and M Street SE. Historic rowhouses and new towers are minutes apart here, so one afternoon can mean a basement laundry in a nineteenth-century house and a stacked unit on an upper floor.

Our ice maker diagnosis follows a sequence: freezer temperature and the water filter before the ice maker itself, since a warm freezer or a clogged filter shuts down production with nothing broken. It is the cheapest route to the right answer.

Three things make booking in Capitol Hill & Navy Yard faster: the model number, a short description of what the appliance is doing, and any building or parking details. Call (703) 468-4416 and we'll find a time. Our coverage here takes in the whole ZIP code.

An ice maker symptom that fools people

Before buying parts online, consider how often the obvious answer is wrong. With an ice maker, the classic example is a commercial machine making less ice in summer, blamed on a failing component when a hot room or dirty condenser is the cause.

We confirm the fault on your ice maker with testing rather than guessing from the symptom, and you hear the cause and the price before any work begins.

What makes ice maker work different in Capitol Hill & Navy Yard

Capitol Hill & Navy Yard is rowhouse territory. That means narrow stairs, doorways a counter-depth refrigerator barely clears, laundry in the basement or a hall closet, and dryer ducts that run the full depth of the house to reach an outside wall. In a rowhouse the installation is often the fault, so we check it before condemning a part.

Something that shapes ice maker repairs around here: moderately hard Potomac water, which builds scale on inlet valves and ice molds over time and makes descaling and filter changes routine. It is the kind of detail a remote call center won't factor in, and it changes what gets checked first.

Ice Maker faults by brand

We repair ice makers from every brand on our list, and the brand changes where the technician looks first. A few examples:

For Sub-Zero ice makers, start with bin sensors stopping or not stopping production; the next most likely cause is biofilm and slime in the water system.

On Atosa ice makers, the faults we find most often are condenser fouling reducing production and bin sensors stopping or not stopping production.

For Hoshizaki ice makers, start with inlet valve faults causing small or hollow ice; the next most likely cause is condenser fouling reducing production.

Gas, refrigerant and electrical work

Some repairs wait until something else is fixed. A dryer on a blocked vent, a gas range on a damaged connector, or any appliance on a circuit that's overheating goes back into service only once that problem is dealt with. In older Capitol Hill & Navy Yard homes, the problem is often in the house rather than the appliance.

A breaker that trips when the dryer starts could be a dryer fault, or a circuit that has been shared with something else since an earlier renovation. Plenty of the District's older homes have had their electrical service upgraded in stages, so we test before we replace parts.

What to have ready when you call about your ice maker

Phone hours: Open 24/7. Call (703) 468-4416, tell us the ice maker model, the symptom and roughly how old it is, and we'll find the earliest slot that works. Same-day visits are often possible.

The price is agreed after diagnosis and before work starts, and the repair is covered by our 90-day parts and 30-day labor warranty. If the ice maker isn't worth fixing, we say so instead of quoting the job.

Ice Maker service in Capitol Hill & Navy Yard, in numbers

$150–$320
Typical repair cost
1–2 hours
Typical time on site
1
ZIP code covered
90 / 30 Days
Warranty: parts / labor
FAQ

Ice Maker Questions From Capitol Hill & Navy Yard

Want to talk it through?

Describe the symptom and your neighborhood, and we will tell you when a technician can get there.

Check your lease first. In most rentals the landlord or property manager is responsible for appliances that came with the unit. We're glad to work with either of you, but if you book, we'll need the owner's go-ahead before starting the repair, and we can give them the diagnosis and price directly.

Often, yes, especially if you call early in the day. It depends on the schedule and on the parts your model is likely to need, so the real answer comes when you call (703) 468-4416 and we check what's open. Calls late in the evening are usually booked for the next day.

It depends on the symptom. Anything involving a gas smell, burning, sparking or a breaker that keeps tripping means stop and call. An ice maker that is merely slow, noisy or less effective can usually wait for the appointment, and we'll tell you which applies when you call.

On this combination, the usual suspects are condenser fouling reducing production; drain pump and drain line problems; and inlet valve faults causing small or hollow ice. Two of those can produce the same symptom on a Maxx Ice ice maker, which is why we test before quoting.

Ice Maker Faults We Repair

The same symptom can come from several parts, so we test before we quote.

  • Freezing Section Not Cold Enough
  • Condenser Dirty Reducing Efficiency
  • Water Inlet Valve Failure
  • Ice Maker Freezing Up Internally
  • Ice Maker Unit Won't Turn On
  • Ice Bin Agitator Motor Failure

Book ice maker repair in Capitol Hill & Navy Yard

A typical ice maker repair costs $150–$320 and takes 1–2 hours on site. You agree the price before work begins.

Appliance Repair in Washington, DC

Ice Maker Repair for Every Kind of Home

We fix ice makers across Capitol Hill & Navy Yard, from everyday brands to built-in and professional models. Expect most repairs to fall in the $150–$320 range; the technician confirms the exact price after diagnosing.

Manufacturer-Specified Parts
The part the maker lists for your model, unless you choose otherwise
Building-Friendly Visits
Tell us your building's access rules and we plan around them
Flexible Scheduling
Phones: Open 24/7
Price Set Before Work
The quote you approve is the price you pay for that repair

How an Ice Maker Repair Visit Works

01
Describe the Problem
Use the form or call (703) 468-4416
02
Pick a Visit Time
Same day if a route has room, otherwise the next opening
03
Diagnosis, Then Price
Nothing is replaced until you say yes
04
Repair and Run It
We run a full cycle before packing up
CallBook