Call Now

Ice Maker Repair

Ice Maker Repair in Shirlington & Fairlington

We service undercounter and freestanding residential ice machines, clear-ice and nugget models, and the commercial cubers used in restaurants and bars. Descaling and sanitizing, water pumps, inlet valves, drain pumps, bin controls, harvest components and condenser fans make up most repairs. We cover 22206, and same-day visits are often possible.

Rowhouses, condos and detached homesSame-day visits when the route allows90-Day Parts & 30-Day Labor WarrantyPrice approved before any work
1–2 hours
Repair time
90 / 30 Days
Warranty
(703) 468-4416

Open 24/7 · a person picks up

Request a RepairStep 1 of 2
01 The job
02 Your details
Property
01Property
Where
02Where
What needs fixing
03What needs fixing

Prefer to talk? (703) 468-4416

90 / 30 Days
Warranty: parts / labor
Same Day
Visits Often Available

Ice Maker Service Area in Shirlington & Fairlington

The ZIP code this route covers

  • 22206

Ice Maker Brands We Fix

9 manufacturers that make this appliance

Sub-Zero logoAtosa logoHoshizaki logoIce-O-Matic logoManitowoc logoMaxx Ice logoPerlick logoScotsman logoU-Line logo
Ice Maker · Shirlington & Fairlington

Ice Maker problems we see in Shirlington

Shirlington & Fairlington is in South Arlington, reached along South Quaker Lane, Interstate 395, Campbell Avenue and South Walter Reed Drive. Much of the housing is garden apartments and condos from the 1940s onward, mixed with newer mid-rise buildings and streets of small single-family houses, so we ask what kind of building you are in when you book.

On an ice maker we work in a set order: freezer temperature and the water filter before the ice maker itself, since a warm freezer or a clogged filter shuts down production with nothing broken.

Our Shirlington & Fairlington coverage takes in the whole ZIP code. Street parking is tight and much of it is zoned for residents, so if you have a driveway, alley access or a visitor pass, mention it when you call (703) 468-4416.

Why the obvious ice maker part is often the wrong one

A common trap with ice makers is an ice maker assumed dead when the supply line is kinked behind the refrigerator or the inlet screen is clogged with mineral deposits. Ordering a part based on that first impression is how people end up with a new component and the same problem.

A correctly fitted part still leaves the ice maker broken if it wasn't the part that failed, and many parts sellers won't take back electrical components. Diagnosing first avoids paying twice.

What makes ice maker work different in Shirlington & Fairlington

The housing in Shirlington & Fairlington changes block by block, and so does the job: a compact stacked washer in a condo, a full-size pair in a rowhouse basement, a built-in refrigerator in a remodeled kitchen. With the model number up front, we can bring the right parts for whichever one you have.

Something that shapes ice maker repairs around here: moderately hard Potomac water, which builds scale on inlet valves and ice molds over time and makes descaling and filter changes routine. It is the kind of detail a remote call center won't factor in, and it changes what gets checked first.

How ice maker failures differ by maker

Every ice maker brand we service has its own weak points, which is why we ask for the make and model when you book. Some typical patterns:

On Manitowoc ice makers, the faults we find most often are bin sensors stopping or not stopping production and scale on the evaporator slowing harvest.

On Maxx Ice ice makers, the faults we find most often are drain pump and drain line problems and inlet valve faults causing small or hollow ice.

What we see on Perlick ice makers: bin sensors stopping or not stopping production, then scale on the evaporator slowing harvest.

How a repair is priced in Shirlington & Fairlington

We don't quote Shirlington & Fairlington repairs over the phone, because a symptom isn't a diagnosis. A refrigerator that's running warm could have a failed fan motor, a defrost problem, a bad sensor or a refrigerant leak, and those are very different jobs.

The technician finds the fault first, explains it, and gives you one price for the repair, parts and labor together. You decide before any work starts. If the number doesn't make sense for the age of your appliance, we'll say so.

Booking ice maker repair in Shirlington & Fairlington

Call (703) 468-4416 with the model number and a short description of what the ice maker is doing. The model number is on a label inside the door, on the frame or on the back panel, and it lets the technician bring the parts that commonly fail on that model.

We quote after diagnosing, the price doesn't move once work on the ice maker starts, and parts and labor are covered by our 90-day parts and 30-day labor warranty.

Ice Maker service in Shirlington & Fairlington, in numbers

$150–$320
Typical repair cost
1–2 hours
Typical time on site
1
ZIP code covered
90 / 30 Days
Warranty: parts / labor
FAQ

Ice Maker Questions From Shirlington & Fairlington

Want to talk it through?

Describe the symptom and your neighborhood, and we will tell you when a technician can get there.

Often, yes, especially if you call early in the day. It depends on the schedule and on the parts your model is likely to need, so the real answer comes when you call (703) 468-4416 and we check what's open. Calls late in the evening are usually booked for the next day.

Yes. Many buildings in Arlington, VA require a certificate of insurance and a reserved service elevator before a contractor comes in. Give us the building name or address when you call (703) 468-4416 and we'll arrange it with management ahead of time. We also service the compact and stacked appliances these buildings tend to use.

About 1–2 hours on site for a typical repair, diagnosis included. Built-in units take longer because getting them out of cabinetry safely is part of the job. If a part needs ordering, you hear the lead time with the quote and the return visit is booked before the technician leaves.

Drain pump and drain line problems heads the list, followed by biofilm and slime in the water system and inlet valve faults causing small or hollow ice. Scotsman makes both cubers and nugget machines; the nugget models use an auger and gearmotor that wear differently from a cuber's harvest system.

Ice Maker Faults We Repair

The same symptom can come from several parts, so we test before we quote.

  • Water Leaking from Ice Maker
  • Ice Not Dispensing
  • Ice Has Bad Taste or Odor
  • Producing Small or Hollow Ice Cubes
  • Ice Cubes Appear Cloudy
  • Ice Maker Overflowing Bin

Book ice maker repair in Shirlington & Fairlington

A typical ice maker repair costs $150–$320 and takes 1–2 hours on site. You agree the price before work begins.

Appliance Repair in Arlington, VA

Ice Maker Repair for Every Kind of Home

Ice Maker trouble in Shirlington & Fairlington? A typical visit takes 1–2 hours including diagnosis, and the price is fixed before work begins. Here is how we approach ice maker repairs and what affects the cost.

Manufacturer-Specified Parts
The part the maker lists for your model, unless you choose otherwise
Building-Friendly Visits
Tell us your building's access rules and we plan around them
Flexible Scheduling
Phones: Open 24/7
Price Set Before Work
The quote you approve is the price you pay for that repair

How an Ice Maker Repair Visit Works

01
Describe the Problem
Use the form or call (703) 468-4416
02
Pick a Visit Time
Same day if a route has room, otherwise the next opening
03
Diagnosis, Then Price
Nothing is replaced until you say yes
04
Repair and Run It
We run a full cycle before packing up
CallBook